Page 4
For technical questions, please call 1-888-866-5797.
Item 56833
Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Installation
1. Select the location for the String Lights.
2. Carefully unwind the String Lights and place in
the desired location. Avoid any tripping hazard.
3. Install batteries into the Battery Box being careful
to adhere to polarity. Close both locks on box.
4. Place the Battery Box in a secure location being
sure its power cord is not strained. The Battery
Box may be hung by its handle, if desired.
Operation
1. Pull the battery tab out of the Remote Control.
2. Point the top of the
Remote Control
at the String
Lights and turn lights on by pressing the ON button.
Note:
The Remote Control must have
a direct line of sight to the Lights.
3. Use the Remote Control to turn the String
Lights on/off and select mode changes.
4. Turn off the String Lights by
pressing the OFF button.
Remote Control
_
+
MODE
DIM
ON
1
2
3
4
5
6
7
8
OFF
TIMER
Button
Selection
ON
Turns lights On
TIMER
When enabled, lights
6hr on and 18hr off
OFF
Turns lights Off
MODE
1
Combination
2
Waves
3
Sequential
4
Slow Glow
5
Chasing Flash
6
Slow Fade
7
Twinkle Flash
8
Steady on
DIM
–
Decreases light intensity
+
Increases light intensity
Battery Box
Instead of the Remote Control, the button on the
top of the
Battery Box
may be used to control the
String Lights. Press the Control Button to toggle the
lights on and off, and cycle through the modes.
Battery Box
Control
Button
Press
Mode
Once Combination
Twice Waves
3
Sequential
4
Slow Glow
5
Chasing Flash
6
Slow Fade
7
Twinkle Flash
8
Steady on
9
Off
