Page 5
For technical questions, please call 1-888-866-5797.
Item 58469
Operation
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
TO PREVENT SERIOUS INJURY OR DEATH FROM DRIVING HAZARDS:
Park on level area away from traffic and set vehicle parking brake/chock
tires. Test operation of all lights before every use. Troubleshoot and repair
before using. Do not use while trailer light operation does not match
vehicle light operation, if any lights do not light up, or if any lights flicker.
Operating Instructions
1. Connect Transmitter to the four-
pin or seven-pin towing light
connector on the tow vehicle.
WARNING:
Make sure the Transmitter
is secured to the body or chassis of
the tow vehicle and is not hanging
anywhere near the road surface.
2. Press the Power button at the top of
each light TWICE to turn on. Each
light will flash briefly when turned on.
3. The Towing Light Kit is now ready for
use. It will automatically illuminate
when running lamps, brake pedal or turn
signals in the towing vehicle are used.
4. Test each vehicle function before
towing, making sure that tow
lights respond properly.
5. After towing, disconnect Transmitter,
remove tow lights from towed vehicle,
clean with a moist cloth, and store in
dry location out of reach of children.
Do not drag the magnetic bases to
disconnect, as they may scratch the
body paint. Push to tilt then remove.
Battery Disposal
1. Using a hammer (sold separately),
break the light open from the
side, where the lens and housing
are welded together.
2. Remove the lens.
3. Using a screwdriver (sold
separately), disassemble the circuit
board to access the battery.
4. Remove the battery.
