Page 4
For technical questions, please call 1-888-866-5797.
Item 58469
Setup
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this document including all text under subheadings therein
before set up or use of this product.
Towing Vehicle Installation
1. Before installing, check the battery
power of each light by pressing
the Power button. If less than two
indicator lights turn on, charge
each light fully before operation.
A full charge will take 11 hours.
2. To help avoid scratches, clean
the mounting locations and make
sure the magnetic bases are free
of debris before mounting.
3. Set the lights on the back of the
vehicle being towed so that the red
side of each light faces backwards.
4. Each light is clearly marked with
‘Driver’ and ‘Passenger,’ indicating
the side of the tow vehicle where
they should be placed. Mount lights
according to these markings.
5. Mount the tow lights high, whenever
possible. Try to maintain a distance
of 6 to 8 feet between the two
tow lights. Choose a location that
offers complete visibility to ALL
following vehicles at ALL times.
Note:
Check your state’s regulations
on tail light spacing.
6.
CAUTION!
Have an assistant
operate the vehicle’s lights while
you carefully check that the
vehicle lights and the towing
lights all work properly.
• The tow lights should both
light when the towing vehicle’s
running lights are switched on.
• The tow lights should both light
brightly as you apply the brake.
• The tow lights should flash
brightly for left turn and right
turn, AND match tow vehicle
flashing with respect to driver
side or passenger side.
If ANY function of the vehicle
lights or towing lights does not
work, do not drive the towing
vehicle until all lights are repaired
and retested successfully.
Charging
1. Insert the end of the Charging Cable into
the charge port underneath each light.
2. Plug other end of the Charging Cable
into the USB port of the Charger.
3. Plug Charger into a 2A electrical outlet.
4. To charge the lights while inside your
vehicle, connect Charging Cable
to the Cigarette Plug Charger.
5. Connect Cigarette Plug Charger to the
vehicle’s cigarette plug, if provided.