Page 8
For technical questions, please call 1-888-866-5797.
Item 64831
Sa
F
ety
Opera
ti
O
n
in
S
pecti
O
n
in
S
talla
ti
O
n
9� Attach Wheels (6)� See Figure F�
a� Put a Flat Washer (23) on the
Wheel Axle (5) and slide a Wheel on�
b� Add a second Flat Washer (23) and R-Pin (24)�
c� Repeat for the other Wheel�
Flat Washer (23)
r-pin (24)
Wheel (6)
Flat Washer (23)
Figure F
10� Attach Latch (8) and Spring (7)
to Hitch� See Figure G�
a� Slide the Latch Bolt (26) through the side
hole of the Hitch (9)� After it passes through
to the inside, add a Spacer (28) onto the
Bolt as seen in the top of Figure G�
b� With the Latch’s notch facing the back of the
Cart, guide it under the Hitch Support (3)�
Then, guide it up though the Hitch Support’s
notch which should be lined up with the
center oblong hole in the Hitch�
c� Feed the Bolt through the Latch’s
second
hole� Add another Spacer to the
Bolt so that the Latch is centered and
sandwiched between the two Spacers�
d� Once the Bolt is passed through the
other side of the Hitch, thread on the
Latch Lock Nut (27) and tighten securely�
e� Using pliers (not provided), connect the
Spring (7) by placing one of its hooks into the
top
hole of the Latch and the other into the
center round
hole of the Hitch� See Figure G�
f� Pull Latch to ensure it operates smoothly�
One Spacer (28) on each side of latch
latch
Bolt (26)
latch (8)
latch lock
nut (27)
Spring
(7)
Hitch (9)
Hitch
Support
(3)
Figure G
11� Attach Hitch Pin Bracket (10) and
Hitch Pin (25) to Hitch� See Figure H�
a� Connect Hitch Pin Bracket to Hitch (9) using
two sets Hex Bolts (22), Lock Washers (20),
and Nuts (21)� Tighten securely�
b� Feed Hitch Pin through Hitch Pin Bracket
and Hitch� Secure with R-Pin (24)�
Hitch (9)
Hitch pin
Bracket (10)
r-pin
(24)
nut (21)
lock Washer
(20)
Hex Bolt (22)
Hitch pin (25)
Figure H
12� Flip Cart over and attach Rear Cross Brace (11)
and Rear Corner Brackets (12)� See Figure I�
a� Connect the Rear Cross Brace to
the Bottom Panel using six sets of
Rounded Bolts, Lock Washers, and Nuts�
b� Attach the two Rear Corner Brackets, one to
each Rear Cross Brace corner, using four sets of
Rounded Bolts, Lock Washers, and
Nuts each� Tighten all connections�
nut (21)
lock Washer (20)
rounded Bolt (18)
rear cross
Brace (11)
rear corner
Bracket (12)
Figure i
