Page 10
For technical questions, please call 1-888-866-5797.
Item 64831
SaFety
Opera
tiOn
inSpectiOn
inSt
alla
tiOn
Operating instructions
procedures not specifically explained in this manual must
be performed only by a qualified technician.
tO preVent SeriOUS inJUry :
remove any load before performing any inspection, maintenance, or cleaning procedures.
tO preVent SeriOUS inJUry FrOM tOOl FailUre:
Do not use damaged equipment. if abnormal noise or vibration occurs,
have the problem corrected before further use.
attaching the trailer cart to towing Vehicle
1� Trailer Cart should be on a level surface
with wheels locked in place (such as using a
brick behind and in front of each wheel)�
2� The towing vehicle should be turned off, braked
and backed in front of the Trailer Cart’s hitch�
3� Remove the Trailer Cart’s Hitch Pin (25)
from the Hitch Pin Bracket (10)�
towing
vehicle’s
connector
trailer
cart’s hitch
Hitch pin (25)
r-pin (24)
4� Join the Cart’s hitch to the towing vehicle
by lining up the Hitch Pin Bracket (10) with
the hole in the connector on the vehicle�
5� Connect the Hitch Pin so that it passes through
the vehicle’s connector and Trailer Cart’s hitch�
6� Connect the R-Pin (24) to the bottom
of Hitch Pin securing it in place�
r-pin (24)
Hitch pin
Bracket (10)
tilting the trailer cart for Unloading
1� Trailer Cart should be on a level surface
and attached to the towing vehicle which
should be turned off and braked�
2� To dump a load, clear an area
behind the Trailer Cart�
3� Remove the Tailgate (17)�
4� Grasp the Latch (8) and pull it towards the
Hitch Pin� The Cart should unlock from the
Hitch allowing the Cart to tilt� Tilt the front up
so the load falls from the back of the Cart�
pull
latch
5� If necessary, use a rake or similar tool
to empty the load from the Cart�
6� Once load is emptied, push the front of the Cart
down onto the Hitch until it locks in place�
7� Reattach the Tailgate�
