Page 5
For technical questions, please call 1-888-866-5797.
Item 64827
6. Pull one of the Front Leg Locks inward,
and swing the nearby Front Leg out fully.
Release the Front Leg Lock and make sure that
it locks in place behind the extended Front Leg.
Repeat for the other Front Leg Lock and Front Leg.
Front Leg Lock
Front
Leg
Front
Leg
Figure F
7. Turn the Work Station upright on a flat, hard, stable
surface. Check that all locks are fully engaged
and all folding parts are unfolded completely.
Operation
1. Loosen the Slide Knob, slide the Vise Switch up to
the unlock position, and push the Sliding Jaw open.
Slide
Knob
Sliding Jaw
Vise Switch
Figure G
Note:
For working with very large workpieces,
slide the Sliding Jaw back off the end of the
Work Station, turn it 180 degrees, and reinstall it.
2. Place the workpiece between the Jaws
with its center of gravity centered above
the center of the Work Station.
3. Slide the Sliding Jaw up against the workpiece.
4. Slide the Vise Switch down to the lock position.
5. Step on the Pedal repeatedly to
secure the workpiece.
WARNING! To prevent serious injury and
product damage, do not jump on the pedal.
6. To release the workpiece:
a. Slide the Vise Switch up to the unlock position.
b. Step down slightly on the Pedal and then allow
it to rise, releasing pressure on the workpiece.
After Use
1. Slide the Vise Switch up to the unlock position
and slide the Sliding Jaw closed. Step down
slightly on the Pedal and then allow it to rise,
releasing pressure. Tighten the Slide Knob.
Slide
Knob
Sliding Jaw
Vise Switch
Pedal
Figure H
2. Turn the Work Station over. Press one of the
Front Leg Locks inward and fold the nearby
Front Leg up against the Work Station.
Repeat for the other Front Leg Lock and Front Leg.
Front Legs
Front
Leg Lock
Front
Leg Lock
Figure I
