Page 9
SKU 92509
For technical questions, please call 1-800-444-3353
SYMBOLOGY
Table B
UNPACKING
When unpacking, check to make sure that all the parts are included. Refer to the Assembly
section, and the Assembly Drawing and Parts List at the end of this manual.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible.
OPERATING INSTRUCTIONS
Caution: Before cutting or trimming, run the tool for about 10 seconds to ensure that all
moving parts are running smoothly, and there are no loose parts, rattles, or sparking
that would indicate damage. Be sure the bit is firmly and properly installed before use.
Improperly installed bits may eject suddenly at high speed from the Router.
Controls and Indicators
On / Off Switch (6)
Handles (37)
Loosen to raise
or lower bit height
Ruler (44)
Base (54)
Knob (53) for Base
Angle Adjustment
Spindle Lock Button
Collet Nut (31)
Knob (40) - Unscrew
to remove Upper Ring (38)
