![background image](http://html1.mh-extra.com/html/harbor-freight-tools/central-pneumatic-39170/central-pneumatic-39170_assembly-and-operating-instructions_596785005.webp)
Attaching the Fluorescent Light
Make certain power is off and Blast Cabinet is unplugged prior to any installation. See main Assembly Diagram
(page 8) and Light Assembly Diagram for attaching Light.
Step 1)
Connect the Clamps (47) to the Back Board of the Cabinet. Insert the Fluorescent Light into
the clamps.
Step 2)
The wiring for the Light (23) will go through the upper left side of the Cabinet (see Assembly
diagram). The red and black wires are then connected to the Transformer (22). Plug should be
attached to the switch box/Transformer.
Step 3)
Attach the Transformer (22) to the Cabinet with 2 screws.
Replacing the Bulb
Disconnect and unplug the Light and attached wiring from the Transformer/Switch box. Pull the Light out of
the Clamps and remove from the Cabinet. Replace with a new bulb.
Operation
#39170
Page 5
Light-Figure 1
Light-Circuit Diagram
Red +
Red
Black-G
Black
Brought to You by Augusta Flint