SKU 91966
For technical questions, please call 1-800-444-3353.
Page 9
UNPACKING
When unpacking, check to make sure all the parts shown on the
Parts List on page 13
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE:
For additional information regarding the parts listed in the following pages, refer
to the
Assembly Diagram
on
page 14
.
1.
CAUTION:
Always make sure the Power Cord (12) of the Brake Washer is un-
plugged from its electrical outlet
prior to assembling or making any adjustments
to the tool.
2.
Attach the two Casters (17), and the two Casters With Brakes (16) to the four
metal brackets on the bottom of the unit. Using a wrench (not included), secure
them with Washers (27) and Nuts (26). See the Assembly Drawing on page 14
and
FIGURE 1
below.
3.
Fit the Elbow (18) onto the right side of the Tank (29). Insert and thread the Ball
Valve (19) into the Elbow (18). See the Assembly Drawing on page 14 and
FIGURE 1
below.
FIGURE 1
Caster (17)
Caster With Brake (16)
Nut (26)
Hose (8)
Latch
Tank (29)
Lid (15)
Ball Valve (19)
Hose Connector (9)
Brake