Item 99857
For technical questions, please call 1-888-866-5797.
Page 9
Brackets A and B to grip the Battery
Charger. Attach to the compartment
wall using two Self Tapping Screws
(12).
5.
Side View of Brackets
Assembly
Slide Bracket C (5)
under Battery
Attach Output Wires
to Battery Terminals.
Bracket B (6)
Bracket A (9)
For mounting under the battery,
assemble Brackets A, B and C (9, 6
and 5) as shown in
Figure 2 above
.
6. Slide Bracket C (5) under the battery
to hold the Charger in place.
7. Be sure the Battery Charger is firmly
attached and will not come loose
during normal vehicle use or during
a sudden stop. Periodically check
the Charger to be sure it is still firmly
attached. A loose Battery Charger
can become damaged, or damage
vehicle components.
8. Be sure the vehicle ignition switch
is in the OFF position. Using the
vehicle battery clamp bolts, attach
the round connectors of the Output
Wires (12) to the battery. Be sure
the Red Output Wire is attached
to the Positive (+) terminal and the
Black Output wire is attached to the
Negative (-) terminal. Be sure all
connections are tight.
9. Keep Output Wires (12) and Power
Cable (8) clear of fan, fan belt,
pulleys and any other moving parts of
the engine.
Functions
When plugged in, this Battery
Charger will charge a 12 VDC battery,
and maintain the charge. You can see
the state of charge by observing the
LED lights on the Charger.
3 Stage Charging
This charger automatically works
in three stages, depending on the
condition of your battery.
