Item 99857
For technical questions, please call 1-888-866-5797.
Page 10
10. 1st stage: Constant Current. When
the battery is severely discharged,
the Charger applies Constant
Current. This stage speedily charges
the battery while protecting against
damage, loss of Hydrogen or even
explosion. The battery is charged to a
maximum of 14.8 VDC.
11. 2nd Stage: Constant Voltage. This
is a speed charge cycle for batteries
nearly full. It will top off the battery at
14.8 VDC, utilizing a 200 mA trickle
charge.
12. 3rd stage: Floating Constant Voltage.
This stage maintains a fully charged
battery in its best condition by
constantly applying small “ticks” of
charge. The battery will never fall
below 13.5 VDC.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Tool Set Up
TO PREVENT
SERIOUS INJURY:
Use only an appropriate
extension cord in good
condition to operate this
Battery Charger.
See pages 6 and 7 of this
manual for information on safe
use of extension cords.
Work Piece and Work Area Set Up
1. Designate a work area that is clean,
ventilated and well-lit. The work area
must not allow access by children or
pets to prevent injury and distraction.
2. Route the power cord along a safe
route to reach the work area without
creating a tripping hazard or exposing
the power cord to possible damage.
The power cord must reach the work
area with enough extra length to
allow free movement while working.
3. To prevent electrical shock, avoid
moisture or water in the work area.
General Operating Instructions
1. Be sure the vehicle engine is OFF,
the engine is cool and the key is
removed from the ignition.
