Page 4
For technical questions, please call 1-888-866-5797.
Item 57194
Sa
FE
ty
Op
Era
ti
O
n
Maint
Enanc
E
SE
tup
Specifications
Hose Size
Compatible with 1-1/4″, 1-7/8″, 2-1/2″ hoses
Setup - Before use:
read the EntirE iMpOrtant SaFEty inFOrMatiOn section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
tO prEVEnt SEriOuS inJury FrOM acciDEntaL OpEratiOn:
turn the power Switch of the appliance off and unplug the appliance from its
electrical outlet before performing any procedure in this section.
note:
For additional information regarding the parts listed in the following
pages, refer to the Parts List near the end of this manual.
assembly
1. Place Gasket between Separator Base
and Bucket Lid, lining up holes.
2. Secure Separator to Bucket Lid using 4 Screws,
Washers and Bolts. Tighten securely.
Bucket Lid
Separator
Gasket
3. Place Bucket Lid onto 5-gallon
bucket (sold separately).
4. Ensure Bucket Lid is completely sealed onto
bucket. Any air leaks will affect performance.
5. Place Hose Clamp over Collection Hose.
6. Place Collection Hose over side port.
note:
Gently heat Collection Hose
as needed if it is too tight.
7. Slide Hose Clamp over side port.
8. Tighten Hose Clamp securely.
Hose clamp
collection Hose
Side port
9. Place Hose Clamp over Collection Hose.
10. Place Collection Hose over end of Hose Connector.
11. Slide Hose Clamp over Hose Connector.
12. Tighten Hose Clamp securely.
Hose clamp
collection Hose
Hose connector
