SKU 98177
For technical questions, please call 1-800-444-3353.
Page 3
impOrtant SaFetY
inFOrmatiOn
assembly precautions
Assemble only according to these instruc-
1.
tions. Improper assembly can create haz-
ards.
Wear ANSI-approved safety goggles and
2.
heavy-duty work gloves during assembly.
Keep assembly area clean and well lit.
3.
Keep bystanders out of the area during as-
4.
sembly.
Do not assemble when tired or when under
5.
the influence of drugs or medication.
user precautions
This product is not designed for a child under
1.
the age of 9 years old. Children using this
product must be carefully supervised by a
responsible adult.
Use for intended purpose(s) only.
2.
Inspect before use; do not use if parts are
3.
loose or damaged.
Maintain product labels and nameplates.
4.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
Changes or modifications to this unit not ap
-
5.
proved by the party responsible for compli-
ance could void the user’s authority to oper-
ate the equipment.
Keep hands, hair and loose clothing away
6.
from the propeller when power switch is
turned ON.
additional points of safety:
Turn off transmitter and helicopter when not
1.
in use.
Remove battery from transmitter when not in
2.
use.
Keep your helicopter in your sight so that you
3.
can supervise it all the time.
New alkaline batteries are recommended for
4.
use in transmitter for maximum performance.
You are advised to replace with new batteries
5.
as soon as they become weak.
Users should keep and retain this information
6.
for future reference.
Users should keep strict accordance with
7.
the instruction manual while operating this
product.
Your Transmitter charger is tailor-made for
8.
the rechargeable battery used in helicopter.
Do not use it to charge any battery other than
that in the helicopter.
Do not touch the spinning propeller!
9.
Do not fly above someone’s head!
10.
Regularly examine for damage to the plug
11.
enclosure and other parts. In the event of
any damage, the plane must not be used
with the transmitter charger until the damage
has been repaired.
This plane must only be used with the recom-
12.
mended charger.
Do not try to charge other batteries with this
13.
transmitter charger.
battery precautions:
Before recharging the helicopter battery, you
1.
must wait for 10 to 15 minutes to let the bat-
tery pack cool down. Helicopter is equipped
with a rechargeable battery pack.
Please also pay attention to the following
2.
cautions for safety use:
Do not dispose the battery in fire or heat.
a.
Do not use or leave the battery near a heat
b.
source such as fire or room heater.
Do not strike or throw the battery against
c.
hard surface.
Do not immerse the battery in water. Keep
d.
the battery in a cool dry location.
When recharging, only use the battery char-
e.
ger specifically for that purpose.
Do not over-discharge the battery.
f.
Do not connect the battery to an electrical
g.
outlet.
Do not directly solder the battery or pierce
h.
the battery with a nail or other sharp object.
Do not transport or store the battery togeth-
i.
er with metal objects such as necklaces.
Do not disassemble or alter the battery.
j.
Charge the battery every 6 months.
k.
