Page 9
SKU 96695
For technical questions, please call 1-800-444-3353.
iNspEctiON AND MAiNtENANcE
Do not use damaged equipment. Do not use if parts loose or
damaged. Have any problem corrected before further use.
bEFOrE EAcH usE,
inspect the general condition of the Kennel. Check for
loose screws, misalignment or binding of moving parts, cracked or broken parts,
damaged electrical wiring, and any other condition that may affect its safe opera-
tion.
Regularly check to make sure the Kennel’s Flip Latch (15) is working properly
and that the Gate remains shut when the Flip Latch is used.
1.
2.
WArNiNG
WArNiNG
OpErAtiON
read the ENtirE iMpOrtANt sAFEGuArDs section at the beginning of
this manual including all text under subheadings therein before set up or
use of this product.
Make sure to place the Dog Kennel in a open area away from busy streets and/or
homes. While the gate does latch shut, there is no permanent lock. Be sure to
keep the Kennel within view of a responsible adult. (Though unlikely, a dog MAY
knock the latch up, causing the gate to open. Also, children could climb into the
Kennel.)
Before bringing the animal(s) into the Kennel, make sure there are no exposed
sharp edges or parts that may be sticking into the Kennel. Cut off and/or remove
these sharp edges to prevent the animal injuries.
Depending on the amount of time the dog(s) will be sheltered in the Kennel, be
sure to leave an appropriate amount of food and water for the animals. Chew
toys and/or a doggy bed can also be placed in the Kennel.
Depending on the size or amount of the dogs you intend to shelter, you may want
to secure the Kennel in place by using ground stakes (not included). Dogs can
get excited and lean against the fencing walls, which can cause the Kennel to
move if it is not anchored to the ground.
In case of poor weather (rain, cold, or extreme heat) place a cover over the shel-
ter.
please note:
The Kennel is for temporary outdoor use only.
1.
2.
3.
4.
5.
Secure the Small Chain-Link Fencing (8) to the Gate Frame by following the
above steps and using the remaining Lacing Wire (14).
For added security, take some of the remaining Lacing Wire (14) and cut 6 ties,
each about 8” long. Link these small laces through each corner Support Post (3)
and through the closest diamond-shaped gaps. Use one for each top and bottom
corner, making sure to evenly space them. This will help ensure that the fencing
remains tightly linked to the corner Support Posts (3).
7.
8.