Page 6
SKU 95907
for technical questions, please call 1-800-444-3353.
operation instructions
setting fan speed
Oscillation Lever
Butterfly Nuts (26)
Clip
Figure 2
The Speed Control Switch (2) turns the Car Fan power ON and Off by setting the
Switch to the center position.
The fan speed can be set to either FAST or SLOW by moving the Speed Control
Switch to the side marked with the corresponding speed.
setting fan position and oscillating control
Grasp the Clip and squeeze to open the end. Slide the open end of the Clip onto
the object the Car Fan will be attached to. Make certain the Clip slides fully onto
the object.
Move the Oscillating Lever to the “Unlock” position to allow the Fan to oscillate. Set
the lever to the “Locked” position to have the Fan stay in one position.
The Motor Housing (6) and the Connector (16) can all be rotated to set the Fan to
different angles as desired.
Loosen the Butterfly Nuts (26). Move the Fan to the desired position. Tighten the
Butterfly Nuts back into place.
To operate the Car Fan, plug the Cigarette Plug (1) into the lighter plug receptacle
of your vehicle. Leave it plugged in while using the Car Fan from your vehicle.
do not leave the car fan running if your leave the area.
1.
2.
1.
2.
3.
4.
5.
6.