background image

Page 2

SKU 95907

for technical questions, please call 1-800-444-3353.

specifications

Material

Steel Grill, thermoplastic and 
ABS body

Overall Dimensions

8” L x 2” W x 11-1/2” H x 7-1/4” 
diameter

Fan Size

6”

Clamp Opening Maximum

1-7/8”

Fuse

F2A250V, 2 Amps, 250V

Power Source

12 VDC, 12 Watt Rated Power, 
uses car or vehicle cigarette 
igniter plug

RPM

3280~3780 RPM

Blade Fan

I3

Power Cord Length

67”

save this Manual

You will need this manual for the safety warnings and precautions, assembly, oper-

ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.  
Keep your invoice with this manual.  Write the invoice number on the inside of the front 
cover.  Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number.  Keep this manual 
and invoice in a safe and dry place for future reference.

general safety rules

warning!

read and understand all instructions

failure to follow all instructions listed below may result in 

electric shock, fire, and/or serious injury.

saVe tHese instructions

Keep your work area clean and well lit.  

Cluttered benches and dark areas invite 

accidents.

do not use this product in rain or wet conditions.  

Water entering this product 

will increase the risk of electric shock.

stay alert.  watch what you are doing, and use common sense when using this 
product.  do not use this product while tired or under the influence of drugs, 
alcohol, or medication.

  A moment of inattention while operating this product may 

result in serious personal injury.

1.

2.

3.

Summary of Contents for 95907









Reviews: