background image

Page  2

SKU 95781

For technical questions, please call 1-800-444-3353.

sPECIFICATIONs

Electrical Requirements

AC/DC Adapter Input: 120 VAC / 60 Hz
AC/DC Adapter Output: 12VAC, 200 mA
AC/DC Adapter Power Cord Length: 18”
AC/DC Adapter Power Plug Type: 2-Prong, Non-Polarized
Pump Power Input: 12 VAC / 60 Hz
Pump Power Cord Length: 100”

Timer Markings

30 Min. / OFF / 60 Min.

Timer Power On 
Indicator

1 Green L.E.D.

Water Tank Capacity

84.5 Ounces

Overall Dimensions

16-1/4” Long x 9-3/4” Wide x 9” High

Weight

3.4 Pounds

save This Manual

You will need this manual for the safety warnings and precautions, assembly, oper-

ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.  
Keep your invoice with this manual.  Write the invoice number on the inside of the front 
cover.  Write the product’s serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number.  Keep this manual 
and invoice in a safe and dry place for future reference.

gENERAl sAFETy RUlEs

WARNINg!

REAd ANd UNdERsTANd All INsTRUCTIONs

Failure to follow all instructions listed below may result in 

electric shock, fire, and/or serious injury.

sAVE THEsE INsTRUCTIONs

WORk AREA

keep the watering area clean, dry, and well lit.  

Cluttered, wet, and dark areas 

invite accidents.

do not operate this product in explosive atmospheres, such as in the presence 
of flammable liquids, gases, or dust.  

Electrically powered products can create 

sparks which may ignite the dust or fumes.

ElECTRICAl sAFETy

grounded  products  must  be  plugged  into  an  outlet  properly  installed  and 
grounded in accordance with all codes and ordinances.  Never remove the 

1.

2.

1.

Summary of Contents for 95781















Reviews: