background image

SKU 94830  

       For technical questions, please call 1-800-444-3353 

PAGE 2

PRODUCT SPECIFICATIONS

SAVE THIS MANUAL

 

You will need this manual for the safety warnings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.  
Keep your invoice with this manual.  Write the invoice number on the inside of the front 
cover.  Keep this manual and invoice in a safe and dry place for future reference.

UNPACKING

When unpacking, check to make sure all the parts shown in the 

Parts Lists on page 9 

are included.  If any parts are missing or broken, please call Harbor Freight Tools at the 
number shown on the front cover of this manual as soon as possible.

GENERAL SAFETY RULES

IMPORTANT SAFETY INSTRUCTIONS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions detailed in this manual may

result in serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

1. 

Keep your work area clean and well lit.  Cluttered and dark work areas invite    
accidents.

Maximum Weight Capacity

1,200 Pounds

Side Extension Dimensions

78-3/4” Long x 10” Wide x 2” Thick

Ramp Extension Dimensions 21-3/4” Long x 10” Wide x 1-5/8” Thick

Net Weight

123.5 Pounds

Summary of Contents for 94830










Reviews: