SKU 94043
For technical questions please call 1-800-444-3353. Page 4
Operating the Monocular Without the Illuminator
Warning:
If you are not in a dark area, do not remove the lens cap.
1.
In a near dark environment, remove the Lens Cap (2) from the Objective Lens (3)-see
Figure 1.
2.
Push the Power Button (4) down to view an object-see Figure 1.
3.
Focus the Eyepiece (5) and the Objective lens (3) by turning them until the object you are
viewing is clearly seen-see Figure 1.
4.
As you are viewing an object, over a period of time the image will slowly fade as the unit
shuts itself off. To refresh the image, push down on the Power Button (4) again.
5.
When you have finished viewing an object, replace the Lens Cap immediately.
Operating the Monocular with the Illuminator/LED Light
1.
Use the LED when operating in total darkness.
2.
Push the Power Button (4) down to view an object-see Figure 1.
3.
Push the LED Button (6) down.
The LED Button (6) must continously be held down in order
to view an object while in total darkness.
4.
Focus the Eyepiece (5) and the Objective lens (3) by turning them until the object you are
viewing is clearly seen-see Figure 1.
5.
When you no longer need the illuminator, release the LED Button (6) and the image will
slowly fade as the unit shuts itself off.
6.
Replace the Lens Cap immediately.
Tube Screen Appearance
1.
Light and dark spots caused by an image converter tube may be visible in the field of view.
These are normal and are not considered imperfections by imaging intensifier standards.
Most distortion will occur in the peripheral area, not in the center-see Figure 2 below.
Figure 2-Normal Distortion
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY
KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION
OF REPLACEMENT PARTS THERETO.
