SKU 91851 For technical questions, please call 1-800-444-3353.
Page 3
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. If the tools should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
3.
Double insulated tools are equipped with a polarized plug (one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not change the
plug in any way. Double insulation
eliminates the need for the three wire
grounded power cord and grounded power supply system.
4.
Do not abuse the Power Cord. Never use the Power Cord to carry the Adapter
or pull the Adapter from an outlet. Keep the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace damaged Power Cords immediately.
Damaged Power Cords increase the risk of electric shock.
5.
When operating the Security Camera outside, use an outdoor extension
cord marked “W-A” or “W”. These extension cords are rated for outdoor use,
and reduce the risk of electric shock. Also, protect all connections from moisture.
PERSONAL SAFETY
6.
Stay alert. Watch what you are doing, and use common sense when
mounting the Security Camera. Do not use power equipment while tired or
under the influence of drugs, alcohol, or medication. A moment of inattention
may result in serious personal injury.
7.
Do not overreach when mounting the Security Camera. Keep proper footing
and balance at all times. Proper footing and balance enables better control in
unexpected situations.
8.
Wear eye protection when mounting the Security Camera. Make sure to
wear ANSI approved safety impact eye goggles. Dust mask, non-skid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.
ELECTRICAL SAFETY
2.
Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter plugs.
