SKU 90783
PAGE 3
3. Press the “6” Key on the Keyboard and the Time Display
Mode will read as follows:
(See Figure E.)
AM
12:00 15
FIGURE D
PM
6:00 03
FIGURE E
4. Press the CE Key to confirm. The Time Display
Mode will read as follows: (See Figure F.)
PM
6:00 08
FIGURE F
5. Press the “=” Key on the Keyboard
four times and
the Time Display Mode will read as follows: (See
Figure G.)
6. Input “08 00 15” and the Time Display Mode will
show the correct time in Hong Kong as follows: (See
Figure H.)
PM
6:00 09
FIGURE G
AM
8:00 15
FIGURE H
7. Once the Time is set, just press the Key with the
corresponding Code (number or symbol) on it in
normal Time Display Mode to view the corresponding
time of a city listed in Figure C.
(See Figure C.)
2. While the Measuring Multi-Tool is in the normal Time
Display Mode, press the CE Key to check the times of
other cities shown in Figure C. For example, to check the
time in Hong Kong press RESET and the Time Display
Mode will read as follows. (See Figure D.)
To Set The Time:
1. Time setting follows the Time Zone setting. Press “=”
on the Keyboard
four times to enter the Time Setting
Mode, and input the correct time in the
following order;
“hour-minutes-seconds”.
While in the Time Setting
Mode, press the CE Key to switch between AM and PM.
T
he Calculator Mode:
1. While in the normal Time Display Mode, press the “=”
Key on the Keyboard
once to enter the Calculator Mode.
The Calculator is now awaiting input. When not in
normal Time Display Mode, you can enter the Calculator
Mode by pressing the “=” Key on the Keyboard several
times to switch the menu. (See Figure I.)
FIGURE I
0.
The Countdown Mode:
1. Press the “=” Key on the Keyboard
twice in the
normal Time Display Mode or several times when not in
the Time Display Mode to enter the Countdown Mode.
(See Figure J.)
2. The first “0” will be flashing now. Set the countdown
time by inputting numbers in the following format; “hour-
minutes-seconds”. After setting the countdown time,
press CE
once to start it or press CE twice to switch
between start and stop. When it counts down to “0”, the
Time Display Mode will flash “00-00-00”. (See Figure
J.)
00 - 00 - 00
CT
FIGURE J
The Temperature Measurement Mode:
1. In the normal Time Display Mode, press the “=” Key
on the Keyboard
three times and the Time Display
Mode will read as follows: (See Figure K.)
26.2 C
FIGURE K
2. That means the present air temperature is 26.2 C.
Press CE to switch between C and F. When
not in normal Time Display Mode, enter the Tempera-
ture Measurement Mode by pressing the “=” Key on
the Keyboard several times to switch the menu. (See
Figure K.)
o
o
o
90783 manual.p65
11/17/03, 2:34 PM
3
