Operation
When operating your Combination Fire Pit/Barbeque, refer to each of the operational Figures as
well as to the Parts List and Assembly Diagram located on the last page of this manual.
Use as a Fire Pit
The Combination Fire Pit/Barbeque can be used both ways, as the name indicates. To use as a
Fire Pit, set the Ash Tray (B) down inside the Base (A). Set the Grate (C) down inside the Ash
Tray (B).
Use as a Grill
To use as a Grill, remove the Top (I) along with the Chimney (J) and Cap (K). Set the Ash Tray (B)
on the second set of moveable tabs. Place the Toast Grate (L) on the next (first) set of moveable
tabs. Do not replace or use the Top, Chimney or Cap when using as a Grill.
The Toast Grate (L ) can also be set on top of the Ash Tray (B) as it sits inside of the Base (A).
The Fire Pit/Barbeque also comes with two (2) Hooks (D) to move wood and barbeque ashes while
they are in the Fire Pit/Barbeque.
Warning:
Always use the Hooks (D) to move items in the Fire Pit/Barbeque. Never use your
hands or feet to reach in and move any objects as this may result in burns and
severe injury.
When unpacking your Combination Fire Pit/Barbeque, check to make sure the following parts are
included. If any parts are missing or broken, please call
HARBOR FREIGHT TOOLS
at
1-800-444-3353.
Parts List
Part #
Description
Quantity
Part #
Description
Quantity
A
Base
1
K
Cap
2
B
Ash Tray
1
L
Toast Grate
2
C
Grate
1
M
Pin
2
D
Hook
2
S1
Flat Philips Head Bolt
6
E
Front Door
2
S2
Flat Philips Head Bolt
4
F
Door Frame
1
W1
Spring Washer
10
G
Side Panel
2
N1
Nut (M6)
6
H
Back Panel
1
N2
Cap Nut
4
I
Top
1
J
Chimney
1
Note: Some parts are listed and shown for illustration purposes only and are not available
individually as replacement parts.
#90516
Rev 09/03 Page 5
90516 BBQ.p65
11/4/03, 7:57 AM
5
