background image

Page 4

For technical questions, please call 1-800-444-3353.

SKU 67781 

        

PLEAsE rEAd ThE FOLLOWINg cArEFULLY

THE MANUFACTUrEr AND/Or DISTrIBUTOr HAS PrOVIDED THE PArTS LIST AND ASSEMBLy DIAgrAM IN THIS DOCUMENT AS 

A rEFErENCE TOOL ONLy.  NEITHEr THE MANUFACTUrEr Or DISTrIBUTOr MAKES ANy rEPrESENTATION Or WArrANTy 

OF ANy KIND TO THE BUyEr THAT HE Or SHE IS qUALIFIED TO MAKE ANy rEPAIrS TO THE PrODUCT, Or THAT HE Or SHE 

IS qUALIFIED TO rEPLACE ANy PArTS OF THE PrODUCT.  IN FACT, THE MANUFACTUrEr AND/Or DISTrIBUTOr ExPrESSLy 

STATES THAT ALL rEPAIrS AND PArTS rEPLACEMENTS SHOULD BE UNDErTAKEN By CErTIFIED AND LICENSED TECHNICIANS, 

AND NOT By THE BUyEr.  THE BUyEr ASSUMES ALL rISK AND LIABILITy ArISINg OUT OF HIS Or HEr rEPAIrS TO THE 

OrIgINAL PrODUCT Or rEPLACEMENT PArTS THErETO, Or ArISINg OUT OF HIS Or HEr INSTALLATION OF rEPLACEMENT 

PArTS THErETO.

record serial Number here: 
Note:

 If product has no serial number, record month and year of purchase instead.

Note:

 Some parts are listed and shown for illustration purposes only, and are not available individually as 

replacement parts.

PArTs LIsT & AssEMbLY dIAgrAM

Part

description

Qty.

1

Wall Bracket

1

2

Support Arm

2

3

Screw (M4 x .7 x 35mm)

4

4

Screw (M5 x .8 x 35mm)

4

5

Screw (M6 x 1.0 x 35mm)

4

6

Screw (M6 x 1.25 x 35mm)

4

7

Spacer

4

8

Square Pad

4

9

Washer

4

10

Lag Bolt

4

11

Wall Anchor

4

1

2

3

4

5

6

7

8

9

10

11

Summary of Contents for 67781

Page 1: ...not mount TV Bracket to hollow wall gypsum 2 board or similar material that will not support the weight of the TV Mount only to 2 x 4 wood stud or concrete brick walls that can safely support combined weight of Bracket TV and all attached hardware and components If you are unsure wall is strong enough to 3 support weight of TV and TV Bracket contact a professional installer to reinforce wall Do no...

Page 2: ...o the 2 studs at the marked spots Use Lag Bolts 10 and Washers 9 to mount 3 Wall Bracket to wall See Figure 1 below Attaching to Brick or Concrete Wall NOTE 1 Verify at least 6 of space are between any two holes Use 1 2 carbide tip masonry drill bit and drill four 3 3 8 deep holes Insert the Wall Anchors 11 into the holes 2 making sure they are flush with the wall surface WARNING 3 Wall Anchors mu...

Page 3: ...inst the Support Arms Carry TV to mounted Bracket and lower onto 6 Cross Bars making sure the four tabs of the mounts are hooked onto the top of Cross Bars and that TV is centered See Figure 5 Tighten the two clamping screws leaving about 7 an eight of an inch space See Figure 6 To adjust the TV angle back off the two nuts at 8 the Support Arm hinges by one turn Back off the two angle adjusting sc...

Page 4: ...e undertaken by certified and licensed technicians and not by the buyer The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto or arising out of his or her installation of replacement parts thereto Record Serial Number Here Note If product has no serial number record month and year of purchase instead Note Some parts are list...

Reviews: