PMP2BKUMB1 0221
1
PNT3BKUMB4 2016-2021 Dodge Durango Under Mirror Mount Bracket Kit
For Intersector Surface Mount & mpower
®
NOTICE:
Installers and users must comply with all applicable federal, state and local laws regarding use and installation of warning devices.
Improper use or installation may void warranty coverage.
To review our Limited Warranty Statement & Return Policy for this or any SoundOff Signal product, visit our website at
www.soundoffsignal.com//tech-services/returns/
.
If you have questions regarding this product, contact
Technical Services
, Monday - Friday, 8 a.m. to 5 p.m. or after hours 5 p.m. to 8 p.m. ET at
1.800.338.7337
(press #4).
Questions or comments that do not require immediate attention may be emailed to
SUPERIOR CUSTOMER RELATIONSHIPS. SMARTLY DESIGNED LIGHTING & ELECTRONIC SOLUTIONS.
1.800.338.7337 / www.soundoffsignal.com
PNT3BKUMB4 0221
PART#
YEAR, MAKE, AND
MODEL
COMPATIBILITY
PNT3BKUMB4
2016-2020 Dodge Durango
Surface Mount Intersector
3" or 4" mpower
®
, Stud or Quick Mount
•HIGH CURRENT interconnects must be properly terminated. Poor crimp quality can cause heat
build-up and fire. Follow crimp connector manufacturer instructions.
•DO NOT install this product or route any wires in the Air Bag Deployment Zone. Refer to vehicle
Owner’s Manual for deployment zones.
•Do NOT use system to disconnect headlights, brake lights or other safety equipment.
•Unit may become hot to touch during normal operation.
•Failure to properly install connectors, fuses or wiring may cause vehicle failure or fire.
•Installation must only be performed by trained technician. Installer must determine vehicle wiring
configuration and proper integration of system.
•Use proper wire gauge. All power wires connecting to positive (+) or negative (-) battery terminal
or local chassis ground (-) must be sized to supply at least 125% of max. current and properly fused at
power source.
•Install protective grommets when routing wire through firewall or metal.
WARNING
CONTENTS
#
QTY
COMPONENT
1
1
UNDER MIRROR 90 DEGREE BRACKET
2
2
#8 X.50 SM TRUSSHEAD PHILLIPS
3
1
3M DOUBLE SIDED TAPE VHB
4
2
#8-32 NYLON INSERT LOCK NUTS
5
2
#8-32 X 1” PAN PHILLIPS M/S 18-8 S.S
6
1
THIN GASKET MATERIAL (6”)
7
1
SURFACE PREP WIPE
Intersector Surface Mount Light Features:
• Light has separate control functionality and is sync compatible
with nFORCE products
• Available in Dual or Tricolor
• Allows color to be set to flash or steady-burn
• Multiple housing colors available
mpower® Fascia Light Features:
• 3” and 4”, Stud Mount and Quick Mount Options available
• Collaboration with Dow Corning® to develop ClearDuty™ optical
design
• Greater resistance to gravel pitting, scratching, or cracking
• Improved sealing to prevent water from entering light
• Higher UV and thermal stability to prevent lens from yellowing
over time
