Page 2
SKU 44716
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Trigger
Lever, with safety latch
Tool Exhaust
Rear
Air Inlet Size
1/4-18 NPT
Air Hose Required
3/8”
Working Pressure
90 PSI
Max Rated RPM
22,000
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover.
Keep the manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
WARNING: When using tool, basic safety precautions should always be
followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean
. Cluttered areas invite injuries.
2.
Observe work area conditions
. Do not use machines or power
tools in damp or wet locations. Don’t expose to rain. Keep work area
well lighted. Do not use electrically powered tools in the presence of
flammable gases or liquids.
3.
Keep children away
. Children must never be allowed in the work area.
Do not let them handle machines, tools, or extension cords.
4.
Store idle equipment
. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of
children.
5.
Do not force tool
. It will do the job better and more safely at the rate
for which it was intended. Do not use inappropriate attachments in an
attempt to exceed the tool capacity.
6.
Use the right tool for the job
. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. Do not modify this tool and
do not use this tool for a purpose for which it was not intended.
