SKU 43343
For technical questions, please call 1-800-444-3353.
PAGE 6
ASSEMBLY INSTRUCTIONS
1.
WARNING!
Always make sure to close the valve on the propane tank (not
included) prior to assembling the Propane Stove, performing maintenance, or
making any adjustments to the unit.
2.
CAUTION!
This product is
machine manufactured. Be aware of sharp edges.
Use heavy duty work gloves and ANSI approved safety impact eye goggles when
assembling.
3.
Turn the Propane Stove upside down, and attach a Rubber Foot (7) to each
corner of the unit.
(See Assy. Diagram.)
4.
To attach the
three Temperature Control Knobs (4), loosen the countersunk Screw
in the Knob. Insert the Knob onto the Burner Control Shaft by aligning the flat
edges of the Knob and Shaft. Then, firmly tighten the Screw.
(See Figure A.)
5.
NOTE:
The Propane Stove requires the attachment and use of the
Model 91357
LP Regulator & Hose Kit
or
Model 91359 LP Regulator & Hose Kit
which are
sold separately by Harbor Freight Tools.
(See Figure A.)
6.
A LP regulator MUST be used:
To attach the LP Regulator & Hose Kit to the
Propane Stove, remove the plastic protective cap from the Inlet Connection
Nozzle (5) on the Propane Stove. Then, screw the Hose Connector firmly onto
the Inlet Connection Nozzle.
(See Figure A.)
PROPANE TANK
(NOT INCLUDED)
MODEL 91357 OR MODEL 91359
LP REGULATOR & HOSE KIT
(NOT INCLUDED)
GAS VALVE
HOSE
CONNECTOR
INLET
CONNECTION
NOZZLE
(5)
TEMPERATURE
CONTROL KNOB
(4)
FIGURE A
