SKU 42606
For technical questions, please call 1-800-444-3353.
Page 8
Shelf Assembly
Step 1)
Place one Shelf (14) so that it rests against the Bottom Rail (11) with outside lip resting up
against the Side Panel (9). Secure the two outside corners to the two holes in the bottoms of
the Side Panel with two Bolts (17), Lock Washers (17) and secured with Hex Nut (17)
-see Figure 9 below.
Step 2)
Connect the second Shelf (14) to the Side Panel (9) and the Center Support (10) through the
holes located at midpoint. Secure each corner to the Side Panel (9) and Center Support with
two Bolts (17), Lock Washers (17) and secured with Hex Nut (17).
Step 3)
Place one Drawer Stop Brace (16) so that the holes are aligned with the Center Support (10)
and with the edge of the Drawer Stop Brace (16) almost touching the rear of the Drawer Slides.
Place the second Drawer Stop Brace (16) so that the holes are lined up with the holes in the
Side Panel. Place the Back Wall Panel (12) over the Drawer Stop Braces with the holes
aligned. Insert Bolt (17), Washer and Nut (17) at each corner to secure the Back Wall Panel
(12) and Drawer Stop Braces (16) in place.
Step 4)
Align the holes in the second Back Wall Panel (12) at each corner at the rear of the Shelves
(14). Secure in place with Bolt, Lock Washer and Nut (17).
Figure 8
Corner Brace Support (8)
Figure 9
