SKU 03648
PAGE 3
ASSEMBLY INSTRUCTIONS
1.
On the Backside (#1) of the Magnetic Painter’s Workstation, peel off the protective tape
from the Magnetic Strips and discard.
See Figure A
2.
Mount the Magnetic Painter’s Workstation with it’s folding Tray (#2) on the metal spray
booth wall.
The Magnetic Strips allow you to place the Workstation within easy reach. It
can hold your spray gun in slotted paint gun holder. Notched areas on Tray can hold other
tools.
After mounting the Workstation, double check that it is tightly secured to the booth’s
wall before using.
3.
When not being used, you can fold Tray (#2) up flat against the wall.
See Figure C.
4.
To remove Magnetic Painter’s Workstation from a metal surface, lift the Handle (#9)
and the Offset Wheel (#8) will push Workstation away from the surface and it will
release the magnetic pull.
See Figure D.
5.
If you choose, you can mount the Magnetic Painter’s Workstation on a wall using
screws or nails (not provided). Note: This wall surface must be capable of supporting
the weight of the Workstation and all related tools. Choose hardware that will fit into
the holes on the back of the station. The dimension of the holes are 3/16” wide
(narrowest portion) and 3/8” for the head of the screw or nail. Caution: Do not overload
Workstation.
See Figure E.
Figure B
Figure A
#1
Magnetic
Strips
Holes
Holes
Figure E
#2
Figure C
Figure D
#9
#8
