11
Lowes.com/harborbreeze
Wrap electrical tape (not included) around each
individual wire connector (CC) down to the wire.
WARNING:
Make sure no bare wire or wire
strands are visible after making connections. Place
green and white connections on opposite side of
box from the black and blue (if applicable)
connections.
Turn spliced/taped wires upward and gently push
wires and wire connectors (CC) into outlet box.
2.
2
Hardware Used
E3 Wire Connector
x 4
CC
IMPORTANT
: Using a full range dimmer switch
(not included) to control fan speed will cause a loud
humming noise from fan. To reduce the risk of fire
or electrical shock, do NOT use a full range
dimmer switch to control fan speed.
3.
3
Dimmer
Switch
Speed
Switch
For illustrative purposes only
--
not
intended to cover all types of controls
1
2
3
WIRING
NOTE:
BLACK wire is hot power for fan. BLUE
wire is hot power for light kit. WHITE wire is
common for fan and light kit. GREEN or BARE wire
is ground.
1c.
FAN AND LIGHT CONTROLLED BY TWO
WALL SWITCHES:
If you intend to control the fan
and light with separate wall switches, connect
BLACK wire from fan to BLACK wire from the
independent wall switch for the fan. Connect
BLUE wire from fan to the BLACK
(or RED) wire
from the other independent wall switch for the
light. Connect WHITE wire from fan to WHITE
wire from ceiling. Connect GREEN wire together
from fan (on mounting bracked (A) and downrod
(O)) to BARE/GREEN wire from ceiling.
CC
CC
CC
1c
WHITE
BLACK
BLACK (WALL SWITCH)
GROUND/GREEN (BARE)
BLACK
BLUE
WHITE
WHITE
GREEN
FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES
GREEN
120V POWER
FROM CEILING
