11
Lowes.com/harborbreeze
STANDARD OR ANGLED MOUNTING INSTRUCTIONS
5 . If you decided to cut back the lead wire in Step 4,
strip 1/2 in . of insulation from the end of the white
wire . Twist the stripped ends of each strand of wire
within the insulation with pliers (not included) . Repeat
this step for black, blue (if applicable) and green
wires .
Impootaat:
If you did not cut back the lead wires in
Step 4, Step 5 is not necessary and you
may proceed to Step 6 .
5
6 . Install the ball end of the downrod (A) into the mounting
bracket (C) opening . Align the slot in the ball with the
tab in the mounting bracket (C) . The rod should not
rotate if it is done correctly .
DANGER:
Failure to align the slot in the ball
with the tab may result in serious injury or death .
Proceed to the Wiring section of this manual .
C
A
6
