Lowes.com/harborbreeze
FINAL ASSEMBLY INSTRUCTIONS
G
A
4. Remove one of the three preassembled
screws inside the support bracket of the motor
assembly (A) and retain for later use. Slightly
loosen the remaining screws.
Note:
Make sure to keep loose hardware
separate to avoid confusion during installation.
5
5. Align the large opening of the keyslots on
switch cup assembly (G) with the loosened
screws on motor assembly (A). Turn switch
cup assembly (G) clockwise until the
loosened screws slide into the narrow opening
of the keyslots. Replace the third screw
previously removed in Step 4, page 15, then
tighten all three screws securely.
A
4
G
3
3. Remove the adapter switch cover from the
switch cup assembly (G) by removing the
three preassembled screws. Retain screws for
later use.
Note:
Make sure to keep loose hardware
separate to avoid confusion during installation.
15
