1. PULL CHAIN:
2. REVERSE SWITCH:
When the season changes, you may want to change
the direction your fan spins. To switch between
clockwise and counterclockwise rotations, flip the fan
reversal switch.
WARNING:
Wait for fan to stop before reversing the
switch.
A. In cooler weather, clockwise rotation creates an
upward airflow, which moves hot air from the
ceiling into the room. Push the switch RIGHT.
B. In warmer weather, counterclockwise rotation
creates a downward airflow, which cools the air.
Push the switch LEFT.
• The fan pull chain is for motor speed control:
High, Medium, Low and Off. Pull chain once for
each position.
•
The light pull chain controls the light fixture either
ON or OFF with each pull of the chain.
OPERATING INSTRUCTIONS
Reverse
switch
Fan pull
chain
Light pull
chain
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Fan does not move. 1. Chain switch is “off”.
2. Faulty wire connection.
3. Reverse switch not engaged.
1. Pull chain switch.
2. Turn power off. Loosen canopy,
check all connections.
3.
Push switch firmly either way.
Noisy operation.
1. Blades are loose.
2. Cracked blade.
3. Unapproved speed control.
1. Tighten all blade screws.
2. Replace blades (call customer
service).
3. Replace with an approved speed
control device.
Excessive wobbling. 1. The blades are loose.
2. Blade brackets incorrectly
attached.
3. Unbalanced blades.
4. The fan is not securely mounted.
5. Fan too close to vaulted ceiling.
1. Tighten all blade screws.
2. Reinstall blade brackets.
3. Switch with blade from the
opposite side.
4. Turn power off. Carefully loosen
the canopy and remount securely.
5. Lower fan or move it to another
location.
TROUBLESHOOTING
CARE AND MAINTENANCE
• Important: Shut off main power supply before beginning any maintenance.
• Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly
dampened cloth will be suitable for most cleaning.
•
Clean fan housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean
blades with a lint-free cloth. You may occasionally apply a light coat of furniture polish to blades
for added protection.
• At least twice a year, tighten all screws and lower canopy to check mounting bracket screws and
downrod assembly.
17
16
Lowes.com/harborbreeze
Lowes.com/harborbreeze
