INITIAL INSTALLATION
1
ON
OFF
ON
OFF
Turn off circuit breakers and wall switch to the fan
supply line leads. (Fig. 1)
DANGER:
Failure to disconnect power supply
prior to installation may result in serious injury or
death.
1.
Determine mounting method to use. (Fig. 2)
A.
Normal mount
B.
Angle mount
Important:
If using the angle mount, check to
make sure the ceiling angle is not steeper than 19°.
A
B
2.
2
Check to make sure blades (L) are at least 30 in.
from any obstruction. Check downrod (A) length to
ensure blades (L) are at least 7 ft. above the floor.
(Fig. 3)
7 ft.
min.
30 in.
min.
3
3.
Secure mounting bracket (C) to outlet box using
screws, spring washers, and flat washers
provided with the outlet box. (Fig. 4)
*
Note: It is very important that you use the proper
hardware when installing the mounting bracket
(C) as this will support the fan.
IMPORTANT:
If using the angle mount, make
sure open end of mounting bracket (C) is
installed facing the higher point of the ceiling.
4.
6
4
Outlet
Box
C
L
