If you decided to cut back the lead wires in Step 4,
strip 1/2 inch of insulation from end of white wire.
Twist stripped ends of each strand of wire within
the insulation with pliers (not included). Repeat
Step 5 for black, blue (if applicable) and green
wires.
5.
Install ball end of downrod (A) into mounting
bracket (C) opening. Align slot in ball with tab in
mounting bracket (C).
DANGER
: Failure to align slot in ball with tab
may result in serious injury or death.
6.
Continue to "Wiring" instructions on page 12.
Remove canopy cover from bottom of canopy (B).
[
NOTE
: It may be necessary to use the handle
end of a screwdriver (not included) to remove the
canopy cover by tapping on the canopy cover
from the
inside
of the canopy (B).]
*Helpful Hint
: Closemount style mounting is
more suitable for ceilings lower than 8 ft. (2.44 m)
high. The downrod (A), hanging ball, and canopy
cover are not used in this type of installation.
1.
Canopy
Cover
Slot
Tab
C
A
B
DOWNROD STYLE FAN MOUNTING
CLOSEMOUNT STYLE FAN MOUNTNG
9
5
6
1
Lowes.com/harborbreeze
