13
FINAL INSTALLATION
1. Lift canopy (B) to mounting bracket (C) again,
aligning slotted holes in canopy (B) with loosened
canopy mounting screws (G) in mounting bracket
(C). Twist canopy (B) clockwise to lock. Re-insert
the two canopy mounting washers (F) and canopy
mounting screws (G) previously removed (Step 4,
page 6) and tighten all canopy mounting screws
(G) securely.
1
F
G
B
3. Connect BLUE wire from motor housing (D) to
BLACK wire from LED light kit (K). Connect WHITE
wire from motor housing (D) to WHITE wire from
LED light kit (K). Make sure molex wire connections
snap together securely.
2. Partially loosen two fitter plate screws (S) from fitter
plate on underside of motor housing (D).
3
K
D
Molex
Connections
2
D
S
S
