FINAL INSTALLATION
1.
Partially insert three blade screws (AA), along with
three fiber blade washers (BB), to attach one
blade arm (F) to a blade (G). Then, tighten each
blade screw (AA) starting with the one in the
middle. Repeat with remaining blades (G).
2.
Locate two canopy mounting screws (L) on
underside of mounting bracket (C) and remove
canopy mounting screw (L) closest to the open end
of the mounting bracket (C). Partially loosen the
other canopy mounting screw (L). Lift canopy (B) to
mounting bracket (C). Place rounded part of slotted
hole in canopy (B) over loosened canopy mounting
screw (L) in mounting bracket (C) and push up. Twist
canopy (B) to lock. Re-insert canopy mounting screw
(L) that was removed, and then tighten both canopy
mounting screws (L). Slide canopy cover (I) up to
canopy (B), aligning rounded part of slotted holes in
canopy cover (I) with screwheads in bottom of
canopy (B). Turn canopy cover (I) to the right
(clockwise) until it stops.
Locate motor screws (DD) and lock washers (EE) in
one of the hardware packs.
Insert two motor screws (DD), along with lock
washers (EE), through one blade arm (F) to attach
blade arm (F) to motor. Tighten motor screws (DD)
securely. Repeat with remaining blade arms (F),
making sure to completely secure each blade arm
(F) before proceeding with the next.
3.
3
1
2
11
Lowes.com/harborbreeze
AA
BB
B
L
A
I
G
F
F
G
EE
DD
Hardware Used
Blade Screw
x15
AA
Fiber Blade
Washer
x15
BB
Hardware Used
Motor Screw
x10
Lock Washer
x10
DD
EE
