1
D
2
FINAL ASSEMBLY INSTRUCTIONS
2.
Securely attach and tighten the canopy
screw cover (E) over the shoulder screws in
the hanger bracket (B), utilizing the keyslot
twist-lock feature.
WARNING
To avoid possible fire or shock, make sure the
electrical wires are completely inside the canopy
housing and not pinched between the housing
and the ceiling.
/RZHVFRPKDUERUEUHH]H
E
A
I
1. Remove one of the two preassembled
shoulder screws in the hanger bracket (B).
/RRVHQWKHVHFRQGVKRXOGHUVFUHZZLWKRXW
fully removing it. Then, rotate ceiling canopy
(D) so second shoulder screw moves into the
small opening of the keyslot. Tighten shoulder
screw and re-install the previously removed
shoulder screw to secure ceiling canopy (D) to
hanger bracket (B).
3
3. Remove the preassembled screw from the
blade cover (I) on motor assembly (A). Repeat
for remaining blade covers (I). Retain the
screws for next step.
Note:
Make sure to keep loose hardware
separate to avoid confusion during installation.
11
