14
FINAL INSTALLATION
7. Attach the glass bowl (Q) to the light kit (O) by twisting
the glass bowl (Q) tightly in a clockwise direction until
it is secure.
CAUTION:
Avoid cross-threading the
glass during installation. Improper installation could
cause the glass bowl (Q) to be difficult to remove or
fall, which could cause serious injury.
8. Use a flat-head screwdriver to r
emove the battery
cover from the back of the remote from remote pack
(P) and insert the CR2032 batteries. Replace the
battery cover. If battery is installed correctly, the LED
indicator on the front of the remote transmitter should
illuminate when any button is pushed.
Note:
If remote doesn’t turn on the fan, see
TROUBLESHOOTING (page 17).
9.
If desired, the wall bracket can be installed to the wall
using the two mounting screws from the remote pack (P).
Store the remote In the wall bracket when not in use.
Turn on the circuit breakers and the wall switch to the
fan supply line leads.
Assembly is complete.
O
Q
8
9
7
Wall Bracket
Screws
Wall Bracket
Small Plate