13
FINAL INSTALLATION
1. Align the canopy (E) over the loosened mounting
bracket screws (S) preassembled on mounting
bracket (D). Place the keyholes of the canopy (E)
onto the mounting bracket screws (S) and rotate the
canopy (E) clockwise.
2. Secure the canopy (E) with the mounting bracket
screws (S) previously removed (Step 4, page 8).
Tighten all mounting bracket screws (S) securely.
3. Partially insert the blade screws (CC) along with the
blade washers (DD) through the blade (Q) and into
the blade arm (P). Tighten each blade screw (CC)
with a Phillips screwdriver (not included), starting
with the one in the middle. Repeat this step for the
remaining blades (Q) and blade arms (P).
Hardware Used
CC
Blade Screw
x 15
Blade Washer
x 15
1
2
E
E
S
S
D
Note:
Closemount installation will not use the downrod (A), yoke cover (O) or canopy cover (F).
3
CC
DD
Q
P
DD
