9
Lowes.com/harborbreeze
STANDARD OR ANGLE MOUNTING INSTRUCTIONS
1. Partially loosen the two set screws (X) in the yoke
at the top of the motor assembly (G) to allow for
installation of the downrod (A).
2. Remove the downrod pin (B) and downrod clip (C)
from the downrod (A). Feed the wire harness from
the fan through the downrod (A). Then insert the
downrod (A) -- or a longer downrod, if required --
through the canopy (D) and into the yoke of motor
assembly (G).
3. Align the holes of downrod (A) and the yoke of motor
assembly (G), then re-install the downrod pin (B) and
downrod clip (C). Once secure, re-tighten the set
screws (X).
C
B
G
A
A
G
B
A
G
C
X
D
2
3
1
X
Yoke
