D
E
AA
BB
GG
FF
12
FINAL INSTALLATION
Final Installation
1. Attach blade (E) to blade bracket (D) using the blade
iron screws (AA) and blade washer (BB). Insert a blade
iron screw (AA) into the blade bracket (D). Repeat for
the two remaining blade iron screws (AA).
1
2. Fasten the blade assembly to the motor by inserting the
alignment post into the slot on the bottom of the motor
and tightening the motor screws (GG). Please note the
motor screws may be preassembled to the motor.
Note:
Make sure to place a blade isolator (FF)
between the blade assembly and the motor assembly.
Repeat steps 1 and 2 for the remaining blades.
2
FF
GG
AA
BB
Blade Isolator
x 4
Motor Screw
x 8
Blade Iron Screw
x 12
Blade Washer
x 12
Hardware Used
Hardware Used
