background image

12

CARE AND MAINTENANCE

OPERATION

  At least twice each year tighten all screws and lower canopy to check mounting bracket screws 

and downrod assembly.  Clean fan housing with only a soft brush or lint free cloth to avoid 
scratching the finish. Clean blades with a lint free cloth. Shut off main power supply before 
beginning any maintenance. Do not use water or a damp cloth to clean the ceiling fan.

Remove remote battery door, connect 12V battery (included) with plug pressing the battery inside 

and replace the battery door.

Fan control :
  

 

Low speed

    

 

Medium speed

    

 

High speed

    

 

To turn off the fan

   

 

Press light key quickly to turn light on or off

  For DIMMER function: press and hold     button to dim the light.  The light will cycle from bright to 

dim to bright until button is released.  Light will maintain last setting if turned off.

  This remote (R) has a memory function.  The remote (R) stores the fan speed and light setting 

when the fan is turned off.  When the fan is turned on again, it starts with the most recent setting.

Use the fan reversing switch to optimize your fan for seasonal performance.
Note: Wait for fan to stop before reversing the switch.
• In warmer weather, counterclockwise movement of the fan will result in downward airflow 

creating a wind chill effect.

• In cooler weather, clockwise movement of the fan will result in upward airflow that can help move 

stagnant hot air off the ceiling area.

Lowes.com/harborbreeze

Reverse Switch

Summary of Contents for 35086



























Reviews: