13
FINAL INSTALLATION
8
Remote Control
Bracket
Wall
8. If you wish to use the remote control bracket from
remote pack (Q), install screws from remote pack
(Q) through bracket and into the desired installation
site. The remote control transmitter from remote
pack (Q) rests inside the bracket.
Bracket
Screws
Q
6. Carefully arrange wiring within the fitter plate (N) to
ensure wires do not get pinched when attaching the
light kit fitter (F).
Align slotted holes in light kit fitter (F) with loosened
fitter plate screws (P) on fitter plate (N). Twist light
kit fitter (F) to lock in place. Re-insert the previously
removed fitter plate screw (P) and securely tighten
all fitter plate screws (P).
N
P
6
7. Align slots on glass shade (I) with protrusions on
underside of fitter plate (N). Turn glass shade (I)
clockwise
until it no longer turns.
NOTE:
Pull down gently on the glass shade (I) to
make sure it is secured completely.
7
Slot
Protrusion
I
N
F