8
INITIAL INSTALLATION
4. Remove the mounting bracket screws (K) from
underneath the lower mounting bracket (D). Remove
the motor screws (N) and set aside for later.
Note:
The notch in the fitter plate allows a Phillips
screwdriver (not included) access to motor screws.
5. Place one tab of the lower bracket (D) into a large
slot in the upper mounting bracket (B). Then slide the
second tab of the lower mounting bracket (D) into the
second large slot on the upper mounting bracket (B)
until all four holes are in alignment.
6. Reinstall the previously removed mounting bracket
screws (K) underneath the lower mounting bracket
(D) and into the upper mounting bracket (B). Securely
tighten the screws.
4
5
6
4
5
6
D
N
K
K
B
D
B
D
