14
WIRING
WARNING:
To reduce the risk of fire, electrical shock or personal injury, wire connectors provided
with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If
your house wire is larger than 12-gauge and there is more than one house wire to connect to the two
fan lead wires, consult an electrician for the proper size wire connectors to use.
CAUTION:
Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present.
1. Secure all wiring connections together with wire connector
(AA) and the wire connectors from remote pack (N)
according to the diagram and these steps:
• Connect the Green wires from the fan and the
mounting bracket (D) to the Bare/Green (ground)
supply wire.
Note:
The downrod is not used for
closemount installation, so there will only be two
green wires to connect.
• Connect the Blue wire with white label from the
receiver from remote pack (N) to the Blue fan wire.
• Connect the Black wire with white label from the
receiver from remote pack (N) to the Black fan wire.
• Connect the Red wire with red label from the receiver
from remote pack (N) to the Black (hot/power) supply
wire.
• Connect the White wire with red label from the
receiver from remote pack (N) to the White (neutral)
supply wire.
• Connect the White wire with white label from the
receiver from remote pack (N) to the White fan wire.
Important:
The Blue fan wire is power for the light.
The Black wire is power for the fan. The White wire is
common/neutral. The Green wire is the ground wire. If
supply wires are different colors than referred to above, a
professional electrician should determine proper wiring.
Hardware Used
AA
Wire Connector
x 6
Black (hot/power)
White (neutral)
Bare/Green
(ground)
Red
Whit
e
White
White
Blac
k
Blue
Blue
Black
Green
Green
Receive
r
2. Wrap electrical tape (not included) around wire
connectors (AA) from remote pack down to the wire.
3. Turn the spliced/taped wires upward and gently push
the wires and wire connectors into the outlet box.
WARNING:
Ensure no bare wire strands are visible
after making connections. Place Green and White wire
connections on opposite sides of outlet box from the
Black.
1
D
AA
AA
3
2
