V3400 SERIES
OWNER’S MANUAL
4
SMART STEREO WITH V3412/V3415
A pair of VARI V3412 or V3415 speakers can operate together as a Smart
Stereo system, giving you control of the sound and volume of both speakers
from the first master speaker, and optimally distributing all audio inputs to
both speakers for rich stereo sound.
Inputs 1 and 2 are routed mono to both VARI’s, while Input 3 is routed in split
stereo to the VARI’s.
1
Connect all inputs and make all sound settings on the first (left) unit only.
The second (right) unit’s inputs and controls are all disabled when it is
set to Link In.
2
Set the ROUTING function on first unit to Stereo Master.
3
Set the ROUTING function on second unit to Link In.
4
Connect an XLR (microphone) cable from the first unit’s LINK OUT jack
to the second unit’s LINK IN.
5
MIX OUT jack of the first speaker can optionally be connected to VS18
or other subwoofer, or to send audio to another sound system.
6
If MIX OUT jack is connected to VS12, VS18 or other subwoofer, press
SUB CUT to light the LED that best matches your subwoofer’s size.
V3412/V3415 will then crossover the audio, to keep high frequencies
for itself, and send low frequencies to the sub.
5
BLUETOOTH
®
TROUBLESHOOTING
These steps should resolve any Bluetooth
®
trouble you may encounter:
• Power off the V3412 or V3415 and leave it off
• On your Apple iOS device
1. Open Settings app, select Bluetooth
®
2. If VARI V3412 or VARI V3415 is listed under MY DEVICES, touch info
button, tap to Forget This Device
3. Turn off Bluetooth
®
, wait 10 seconds, turn on Bluetooth
®
• On your Android device
1. Open Settings, select Bluetooth
®
2. If VARI V3412 or VARI V3415 is listed under Paired Devices, touch
gear Icon, and tap to Unpair
3. Turn off Bluetooth
®
, wait 10 seconds, turn on Bluetooth
®
•Then power on your V3412 or V3415, and if Bluetooth LED is not flashing, press On/Pair briefly so LED flashes
•You should now be able to connect to V3412 or V3415 via Bluetooth
®
4
1
Use MIX OUT to
send audio to another
sound system.
If sending to a
subwoofer, set
SUB CUT to match
subwoofer size.
3
6
2
