LV12 & LV14
OWNER’S MANUAL
4
QUICK START GUIDE: LVLV12 & LV14
CHECK KNOBS AND SWITCHES
• Turn all white-capped level knobs and MAIN level controls to the minimum (full counter-clockwise)
position. These are the CH 1 - CH 7|8 (LV12) and CH 1 - CH 11|12 (LV14) GAIN and level controls
and well as MAIN level controls
• Turn all grey-capped and blue-capped knobs to the 12 o’clock position. These are the PAN, BAL and
EQ controls
• Turn all green-capped level knobs to the minimum (full counter clockwise) position. These are the FX
level send controls. You can ignore the FX SELECT, FX ADJUST and FX LEVEL knobs in the FX section,
for now.
• All buttons should be in the up position. The white bottom edge of the button will be clearly visible
and 48V and SOLO LEDs should be off.
SETTING UP / HELPFUL TIPS
• Make sure the power switch is set to the off position
• Plug the included power supply into an AC power outlet and into the
power input on the rear panel of the mixer
INPUT CONNECTIONS
Choose any combination of the following sources:
• MICROPHONE - Connect a microphone to an XLR combo input jack
via XLR or 1/4” cable
• PHONE/TABLET/LAPTOP (ANALOG CONNECTION)- Connect a
tablet, phone or laptop to the CH 11|12 (LV12) or CH 13|14 (LV14)
STEREO input jack via stereo 3.5 mm TRS cable
• GUITAR/BASS - Connect a guitar or bass with a passive pickup to the
L (MONO) CH 3|4 (LV12) or L (MONO) CH 7|8 (LV14) input via
standard 1/4” guitar cable and press the GUITAR Hi-Z button
• COMPUTER (USB CONNECTION) - (LV14) Using a USB type “A”
to type “B” cable, connect the computer’s USB type “A” jack to the
mixer’s USB type “B” jack.
Headphones
Monitor Speakers
FX Section
Master Fader
Guitar/Bass
Microphone
Powered Speakers
Phantom Power
Off for dynamic
microphones, on for
condenser microphones
Laptop
Microphone connects here via XLR
mic cable
Phone/Tablet/Laptop
