7
12-CHANNEL
MIXER
L1202FX Owner's Manual
CONTROL SECTION:
1
High EQ: Controls a high shelving EQ, boosting or cutting
frequencies from 12kHz and above
2
Mid EQ: A peaking EQ control, boosting or cutting frequen-
cies centered around 2.5kHz
3
Low EQ: Controls a low shelving EQ, boosting or cutting
frequencies 80Hz and below
4
HPF: Cuts all frequencies 75Hz and below
5
Aux: A post-fader auxiliary send. It sends the channel to both
the built-in effects processor and the Aux Send output.
6
Pan: Sends the channel to the left output, right output, or some-
where between.
7
Level: Controls the level of the channel going to the
Main outputs.
8
+4/-10 switch: Changes the input sensitivity. Usually balanced
signals be set to +4 and unbalanced connections to -10.
9
Balance: Works in a similar way to a pan control, it turns down
one side or the other of the stereo input.
10
Aux RCA Input: An unbalanced input for a mixdown recorder,
MP3 player, computer or other playback source.
11
Aux RCA Output: Unbalanced output is useful to send to a
recorder, such as a portable recorder or computer to record
a live performance.
12
To Mix: Sends the Aux RCA Input to the Main outputs for live
sound applications.
13
To Phones (Control Room): Sends the Aux Input to the
headphones and control room outs
14
Control Room/Phones level: Controls the level going to the
Control Room outputs and the Phones outputs.
15
Aux Send to Phones: When pressed, the aux send is sent to the
Headphone and Control Room outputs. When up, the Phones
and Control Room outputs are the same as the Main Outputs.
16
Effects Parameter Variable: Changes the characteristics of the
selected effects preset parameters.
17
Effects Level/Clip: Displays the level going to the effects
processor. When the clip turns on, the effects are
being distorted.
18
Effects Preset: Changes the effects processor preset, as listed
on the top of the mixer.
19
FX Return: The overall level from the effects processor that is
being sent to the Main outputs
20
Phantom Power: Sends 48V phantom power to the XLR inputs.
21
Meter: Shows the signal level being sent to the Main Outs. If
the red 0 or +5 lights are on, the output is being distorted.
22
Power LED: Shows that the mixer is switched on.
23
Main Mix: Sets the level to the Main Outs.
1
12
2
13
3
14
4
15
5
16
6
17
7
18
8
19
9
20
10
21
11
22
23
10168 Harbinger Lvl L1202FX Manual.indd 7
7/8/14 3:10 PM
