9
STEP 6
a) Rotate the bar up and latch into
the J-Hooks.
b) Make sure the Swing Arms are
centered in the J-Hooks and that
the Swing Arms are connected to
the Side Bracket as shown here.
STEP 7
a) Tighten the top (not side) with Allen
Wrench provided. This will connect
the left and right assemblies.
b) Try removing and replacing the bar from
the J-Hooks and adjust as necessary
to insure smooth operation.
- IMPORTANT -
Test the installation by gradually putting your full weight on
the bar. Check the Side Brackets, J-Hooks, and door frame for
soundness. If the product does not feel stable, do not use.
J-Hooks
