EN
(36)
Haojue EH150 99011H17502H000 V03 EN+FR 2019-11-28
the oil filling port of the dipstick.
8. Install engine oil the dipstick again.
9. Start the engine and have it run for several minutes.
10. Stop the engine and inspect the engine oil with
the dipstick several minutes later. The engine oil
level should be between the UPPER LEVEL and the
LOWER LEVEL.
B
CAUTION
Use the engine oil recommended in the
“Instructions for use of fuel and engine oil”.
B
CAUTION
Carefully inspect whether the engine parts that
have been dismantled and installed again suffer
any oil leakage.
B
CAUTION
It is suggested to replace the seal rings when the
engine oil filter element is replaced.
CLUTCH
Method to inspect the clutch cable gap
4
: remove the
rubber bush
1
along the clutch cable, operate the clutch
handle and make sure there is a gap of 3–5mm before
there is an apparent resistance. If the gap is insufficient,
adjust it with the method below.
1. Remove the rubber bush
1
along the clutch cable,
loosen the nut
2
.
2. Turn the adjusting screw
3
clockwise till the end.
3. Loosen the lock nut
5
, adjust the nut
6
along
the front-back direction, operate the clutch lever and
adjust the clutch cable gap
4
to be 3–5mm.
4. Do fine adjustment through the adjusting screw
3
.
5. Firmly lock the nut
2
and
5
, and then mount the
rubber bushes
1
.
(36)
Haojue EH150 99011H17502H000 V03 EN+FR 2019-11-28
34
